Categorie
- Toys
- Welding Water Cooler
- Tungsten Electrode Grinder
- Portable Electrode Oven
- Industrial Electrode Oven
- Welding Positioner
- Welding Rotator
- Welding Manipulator
- MIG/MAG Welding Carriage
- TIG Welding Wire Feeder
- Robotic Torch Cleaning Station
- Welding Fume Extractor
- 3D/2D Flexiable Welding Tables
- Punch Machine
- Magnetic drill & Annular cutter
Browse History
-
-
$0.00 USD
-
-
Cutting Compasses for P 80 plasma torch
$22.50 USD
Application
Use for purification of the smoke and dust during the welding, polishing, cutting, grinding process and the recycling of rare metals and precious material, can purify large amounts of suspended small metallic particles in the air.
1, under the help of the fan device, the welding fume is sucked into inlet through sucking hood. There is the flame arrester in the inlet, so the spark can be blocked here, the left fume and dust is sucked into gravity separator, and then the bigger particles firstly descend into dust bag.
2, the smaller particles are arrested in the surface of core filter. The cleaner gas then flow into clean room after being purified by core filters.
3, in clean room, the clean gas is then further purified by active carbon. At last, the gas meets the required standards and enters into air or other required room.
Key Features
1, Large particles was separated in pre-filter, air flow into Particle filtration, waste gas and dust is separated out, filtration efficiency :> 99%.
2, the device is equipped with a high volume and high negative pressure fan, to ensure the purifier high volume flow
3, Small size, easy to install, can be used in harsh conditions
Specification
| Model | AirflowM³/h | VoltageV/HZ | PowerKW | Filter efficiency | Dimension(MM) | NoisedbA |
| WM-1200 | 1200 | 380V/50 | 0.75 | 99.9% | 600*500*600 | <72 |
| WM-1500 | 1500 | 380V/50 | 1.5 | 99.9% | 600*500*600 | <72 |
| WM-2400 | 2400 | 380V/50 | 2.2 | 99.9% | 600*500*600 | <75 |
