Description

● The anti-drip tip of the Dremel Glue gun reduces glue drip for a cleaner work area and wastes less glue. Red and green LED lights tell you when the Dremel 1200 glue gun is “ON” and “Ready-to-use”…taking the guesswork out of ideal temperature. Depending on your project and glue type, you can select from two temperature settings. To keep your work area safer, the kickstand and wide base prevent the glue gun from accidentally tipping over.

● It can be widely used in the production of industry enterprises assembly, packing and other processes. Because it is a tool for high security, so it is suitable for schools, companies, outdoor workers, etc, to use.

● The product heater component is made of positive Temperature Coefficient（PTC）.It’s heating very fast and automatic of control temperature. The temperature of the product couldn’t rise when it heating to the design temperature of the glue gun. Because of this, it can prevent the glue gun to damage from leading the heat of the heater component and save so much, attaining the purpose that grows the service.

● The electricity strength was not to broke through of this product insulate while switch on electricity 3750Vs/min. The hot melt glue gun can use normally in 110V to 240V power supply ,be free from the electric voltage motion to limit, inside place the fuse, use more safely.

Key Features

● Anti-drip tip
● Red and green LED indicator lights
● Dual temperature settings
● Kickstand and wide base

Specification

Detailed Pictures

Application

● The toy model.
● Artificial flowers, Christmas tree.
● Decorations, the metal product.
● The wood product , card paper etc..

 Operation Instruction

1. This series product can use the diameter from Φ10.5mm-Φ11.8mm of melt glue.
2. Insert the melt glue from the glue gun tail, sent to the gun tube, put on the power supply to preheating for 5 to 8 minutes, button up to move the trigger and can extrude the melt glue, and can control the melt glue quantity.
3. While it’s working, if the melt glue is inexhaustibility in one time, then the melt glue need not take out. Put on the power supply to preheating from 5 to 8 minutes when it using next time.
Caution
● Using voltage 100-240V, frequency 50-60Hz
● The hot melt glue gun is a high temperature product, should according to the product line to choose the melt glue that it use to correspond the specification. If the customer used the size of the melt glue that types not agree with, it would cause the melt glue reflux and damaged the glue guns.
● Do not touch the nozzle area or melted glue, for they are high temperature when they working. Forbid to use in the situation that easy fuel and explode easily.
● If the glue gun does not work continuously for 15 minutes, please cut off the power supply. In order to prevent the melts glue to pour from the glue gun to damage it as all.
● When the glue gun working, do not raise it, and nozzle can’t upward. In order to prevent the melts glue to pour from the glue gun to damaged it as all.
● Should usually keep the slippery piece of the glue gun tail sweep, for the melt glue gun can send into the gun tube smoothly.
● Forbid to pull out the melt glue from the glue gun tail parts.
● The glue gun should keep dry in the airiness of place, out of the reach of children and water or wet place.
● This tool at not use must place at it of support up.
● Please do not replace the power cord, replacement power cord if necessary, and must comply with the relevant electrical appliances maintenance personnel may change.