Categorie
- Toys
- TIG Pen
- Welding Gauge
- Magnetic Welding Holder
- Electrode Holder
- Welding Trolley
- Air Gouging Torch
- Earth Clamp
- Chipping Hammers
- Gas Hose
- Wire Brush
- Clamping tools
- Welding Cable
- Welding Cable Connector
- Input&Output Terminal
- Aviation Plug Panasonic Type
- Welding Anti-Spatter Gel/Spray
- Infrared Thermometers
- Tunsten Carbide Rotary Burrs
- Abrasive Discs
- Welding&Cutting Repairing
Browse History
Description
● The V-WAC Gage easily and quickly checks the four essential measurements required for compliance with the NRC Visual Weld Acceptance Criterial.
● Checks undercut depth, porosity comparison, amount of porosity per linear inch and crown height.
● Pointer is easy to set and a locking screw holds it in position for later reference.
● Figures and increments are etched in to surface. They are easy to read and will not rub off.
● ALL four required measurements are made with a single gauge.
● Made of stainless steel and can be easily carried in your pocket.
There are currently no optional accessories for this item.
